Posts for tag: orthodontic treatment
If your child has seen the dentist regularly, and brushed and flossed daily, there's a good chance they've avoided advanced tooth decay. But another problem might already be growing right under your nose—a poor dental bite (malocclusion).
A dental bite refers to the way the upper and lower teeth fit together. In a normal bite the teeth are in straight alignment, and the upper teeth slightly extend in front of and over the lower when the jaws are shut. But permanent teeth erupting out of position or a jaw developing abnormally can set the stage for a malocclusion.
Although the full effects of a malocclusion may not manifest until later, there may be signs of its development as early as age 6. If so, it may be possible to identify a budding bite problem and “intercept” it before it goes too far, correcting it or reducing its severity.
Here are 6 signs your school-age child could be developing a malocclusion.
Excessive spacing. If the spacing between teeth seems too wide, it could mean the size of your child's teeth are out of proportion with their jaw.
Underbite. Rather than the normal upper front teeth covering the lower, the lower teeth extend out and over the upper teeth.
Open bite. There's a space or gap between the upper and lower teeth even when the jaws are shut.
Crowding. Due to a lack of space on the jaw, incoming teeth don't have enough room to erupt and may come in misaligned or “crooked.”
Crossbites. Some of the lower teeth, either in front or back of the jaw, overlap the upper teeth, while the rest of the upper teeth overlap normally.
Protrusion or retrusion. This occurs if the upper front teeth or jaw appear too far forward (protrusion) or the lower teeth or jaw are positioned too far back (retrusion).
Besides watching out for the preceding signs yourself, it's also a good idea to have your child undergo a comprehensive bite evaluation with an orthodontist around age 6. If that does reveal something amiss with their bite, intervention now could correct or lessen the problem and future treatment efforts later.
If you're into social media, you might have run across the idea that there's nothing to straightening your teeth. According to some SM influencers, you can even do it yourself with a few rubber bands. But the truth is, the mechanics of moving teeth are much more complex—and taking orthodontics into your own hands can cause extensive dental damage.
In reality, all bite problems (malocclusions) require the advanced knowledge and expertise of an orthodontist to correct them safely and effectively. Some, in fact, may require other devices along with braces or clear aligners to achieve the desired outcome for a particular malocclusion.
Here are a few of those additional tools an orthodontist may use and why they may be needed.
Headgear. Some malocclusions result not just from misaligned teeth, but problems with jaw or facial structure development. To accommodate additional factors like this, an orthodontist may include headgear during treatment, usually a strap running around the back of a patient's head or neck and attached in the front to brackets bonded to the teeth (usually the molars). Wearing this headgear for several hours a day can improve jaw and facial development.
Elastics. Unlike basic rubber bands DIYers might use to move their teeth (often with damaging results), elastics are specialized bands designed for targeted tooth movement. They're needed for bite problems that require moving some teeth and not moving others. As such, elastics can be applied in conjunction with braces to perform either intended task—move or prevent movement for specific teeth.
Anchorage. One of the tools often used with elastics for targeted tooth movement are temporary anchorage devices (TADs). These are typically tiny screws imbedded into the jawbone a short distance from fixed braces. An elastic band connected to the braces at a specific point is then attached to the TAD, which serves as an anchor point for the elastic.
These and other devices can help orthodontists achieve a successful correction for certain individual bite problems. And unlike the DIY methods touted on the Internet, these additional tools help them do it safely.
If you would like more information on straightening teeth through orthodontics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”
Before we begin correcting a malocclusion (poor dental bite), we need to ask a few questions: How extensive is the malocclusion? How far must we move the teeth to correct it? How might the patient's jaw size impact treatment?
Answering these and other questions help us develop an effective treatment plan. And depending on the answers, we might need to look at other procedures before we install braces—like removing one or more of the teeth.
This isn't a subject to approach lightly: All teeth play an important role in dental function and smile appearance, and ordinarily we want to preserve teeth, not remove them. Sometimes, however, it may be a necessary action to achieve our goal of an improved dental bite.
For example, it might be necessary for correcting a malocclusion caused by severe teeth crowding. This occurs when one or both of the jaws hasn't grown to a sufficient size to accommodate all of the teeth erupting on it. As a result, some of the teeth could come in out of their proper alignment.
If caught early before puberty, we may be able to use other techniques to alleviate crowding, like a device called a palatal expander that influences an upper jaw to widen as it grows. If successful, it could provide later teeth more room to erupt in their proper positions.
But even if additional jaw growth occurs, it may not be enough to avoid a malocclusion or treatment with braces. Alleviating further crowding by removing teeth in little noticed areas could help with subsequent orthodontics.
Removing teeth may also be the answer for other problems like an impacted tooth, in which the tooth has not fully erupted and remains submerged in the gums. It's sometimes possible to use a technique to “pull” the tooth down where it should be; but again, that will still require jaw space that may not be available. The more effective course might be to remove the impacted tooth.
Whether or not tooth extraction will be needed can depend on a thorough orthodontic evaluation and full consideration of all the available options. Even though the ideal situation is to correct a bite with all teeth present and accounted for, it may be for the better good to sacrifice some.
If you would like more information on orthodontic techniques, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removing Teeth for Orthodontic Treatment.”
If you've decided to straighten your teeth, you've made a wise choice for both your dental health and your smile. Now you may be facing another decision—which method to use for bite correction.
Not too long ago people had only one choice—traditional braces all the way. But that changed with the introduction of clear aligners, a series of removable plastic trays worn one after the other to realign teeth. In all but a few situations, clear aligners accomplish the same outcome as braces but without the conspicuous appearance and, thanks to their removability, difficulty in brushing and flossing teeth.
And now, a recent innovation in orthodontics could give you a third option—lingual braces. These are braces fixed to the back of teeth adjacent to the tongue (hence the term “lingual”), rather than on the front as with traditional braces. They essentially perform the same action, only instead of “pushing” teeth like traditional braces, they “pull” the teeth to the target positions. Lingual braces may also ease certain disadvantages people find with traditional braces or clear aligners.
If you're into martial arts, for instance, you may encounter blows to the face that increase your injury risk while wearing traditional braces. Likewise, if you're highly social, clear aligners can be a hassle to take out and keep up with if you're frequently eating in public. Lingual braces answer both types of issues: They won't damage your lips or gums in the case of blunt force facial contact; and they remain out of sight, out of mind in social situations.
Before considering lingual braces, though, keep in mind that they may cost 15-35 percent more than traditional braces. They also take time for some people to get used to because of how they feel to the tongue. And, they're not yet as widely available as traditional braces, although the number of orthodontists who have received training in the new method is increasing.
If you'd like to know more about lingual braces and whether they're right for you, speak to your dentist or orthodontist. You may find that this new option for improving your dental health and your smile fits your lifestyle.
If you would like more information on lingual braces, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Lingual Braces: A Truly Invisible Way to Straighten Teeth.”
The straightening process for a crooked smile doesn't end when the braces come off. There's one more crucial phase to undergo to make sure we don't lose the progress you've achieved: wearing an orthodontic retainer.
Although often viewed as a nuisance, retainers are important because they prevent realigned teeth from reverting to their old positions. This is possible because the periodontal ligament, the gum attachment that allows us to move teeth in the first place, can contain “muscle memory” that naturally tries to draw teeth back to where they once were.
A retainer prevents this from happening: During wear the subtle pressure they exert keeps or “retains” the teeth in their new positions until they're firmly established, usually after several months. While most patients initially wear a retainer around the clock, this will gradually taper off until they're worn primarily during sleep hours.
While retainers come in many different styles and sizes, most fall into one of two categories: removable or non-removable (bonded). The first type, a custom-made appliance a patient can easily take in and out of the mouth, has its advantages. Removing it makes it easier to clean the teeth. They're also adaptable to reduced wear schedules for eating, brushing and flossing, or for special occasions.
But a removable retainer may be noticeable to others. Its removability can also lead to problems. Out of the mouth they're prone to be lost, resulting in additional replacement costs. And immature patients may be easily tempted to take them out too often—or not wear them at all.
A bonded retainer solves many of these potential problems. Because the retainer wire is securely bonded to the back of the teeth, it's not visible to others. And because it can't be removed except by an orthodontist, there's virtually no chance of losing it or haphazard wear.
On the other hand, bonded retainers can occasionally break, requiring repair or replacement. And flossing is more difficult than with a removable retainer, although a little training from a dental hygienist can make that easier.
The choice of retainer depends on the individual and their priorities. But whether removable or bonded, a retainer is absolutely essential for protecting your new, hard-earned smile.
If you would like more information on bonded retainers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Bonded Retainers.”